Computer system requirements:
Below are the minimum computer-system requirements for the ioStation 24c.
Windows®
- Windows 10 (64-bit only)
- Intel® Core™ i3 / AMD A10 processor or better
- 4 GB RAM (8 GB or more recommended)
Mac®
- macOS® 10.13 or higher (64-bit only)
- Intel Core i3 or better (Native support for Apple Silicon)
- 4 GB RAM (8 GB or more recommended)
Mac and Windows Systems
- USB-C® or USB-A 2.0 port compatibility
- 32 GB hard disk space
- PreSonus® Universal Control 2.0 or higher
- Monitor with 1366x768 resolution (high-dpi monitor recommended)
- Multitouch-enabled monitor required for touch operation
Note: The minimum system requirements may differ for DAWs other than Studio One®. Please check the requirements for your DAW of choice with its manufacturer.
Note that the speed of your processor, amount of RAM and size and speed of your hard drive will greatly affect the overall performance of your recording system. Also, a more powerful system (faster processor with more RAM) will allow for lower latency (signal delay) than you might experience while monitoring audio signals.
VST is a registered trademark of Steinberg Media Technologies GmbH
ASIO is a trademark and software of Steinberg Media Technologies GmbH
USB-C® is a registered trademark of USB Implementers Forum
All other trademarks are property of their respective holders
Technical Specifications
Microphone Preamp |
|
|---|---|
| Type | XLR Female (via Combo), Balanced |
| Maximum Input Level | +16 dBu (Balanced, min. gain) |
| Gain Control Range | 80 dB |
| Frequency Response | 20 Hz to 20 kHz (±0.15 dB, unity gain, 48 kHz) |
| Dynamic Range | > 107 dB (A-wtd, min. gain) |
| Total Harmonic Distortion | < 0.007% (1 kHz, min. gain) |
| EIN | < -128 dBu (max gain, 40Ω, 22 kHz BW, A-wtd) |
| Input Impedance | 1.6 kΩ |
| Phantom Power | +48V, > 8 mA per input |
Instrument Inputs |
|
|---|---|
| Type | ¼” TS Female (via Combo), Unbalanced |
| Maximum Input Level | +15 dBu (Unbalanced, min. gain) |
| Gain Control Range | 80 dB |
| Frequency Response | 20 Hz to 20 kHz (±0.2 dB, unity gain, 48 kHz) |
| Dynamic Range | > 110 dB (A-wtd, min. gain) |
| Total Harmonic Distortion | < 0.012% (1kHz, -1 dBFS, min. gain) |
| Input Impedance | > 1 MΩ |
Line Inputs |
|
|---|---|
| Type | ¼” TRS Female (via Combo), Balanced |
| Maximum Input Level | + 22 dBu (Balanced, min. gain) |
| Frequency Response | 20 Hz to 20 kHz (±0.05 dB, unity gain, 48 kHz) |
| Dynamic Range | > 114 dB (A-wtd, min. gain) |
| Total Harmonic Distortion | < 0.007% (1 kHz, -1 dBFS, min. gain) |
| Input Impedance | 10 kΩ |
Main and Line Outputs |
|
|---|---|
| Type | ¼” TRS Female, impedance balanced |
| Maximum Output Level | +18 dBu (Balanced) |
| Frequency Response | 20 Hz to 20 kHz (±0.2 dB, unity gain, 48 kHz) |
| Dynamic Range | > 109 dB (A-wtd) |
| Total Harmonic Distortion | < 0.005% (1 kHz, +4 dBu) |
Headphone Outputs |
|
|---|---|
| Type | ¼” TRS Female, Stereo, Unbalanced |
| Maximum Output Level | 150 mW/channel (56Ω load) |
| Frequency Response | 20 Hz to 20 kHz (±0.2 dB, 56Ω load, 48 kHz) |
| Dynamic Range | > 107 dB (A-wtd) |
| Total Harmonic Distortion | < 0.02% (1 kHz, -1 dBFS, no load) |
| Headphone Impedance (working range) | 32Ω to 300Ω |
Digital Audio |
|
|---|---|
| Connection Type | USB 2.0 over USB-C® Compatible Connection |
| ADC Dynamic Range | 115 dB (A-wtd) |
| DAC Dynamic Range | 115 dB (A-wtd) |
| Bit Depth | 24 bits |
| Supported Sample Rates (kHz) | 44.1, 48, 88.2, 96, 176.4, 192 kHz |
Clock |
|
|---|---|
| Jitter | < 70 ps RMS (20 Hz – 20 kHz) |
| Jitter Attenuation | > 60 dB (1 ns in => 1 ps out) |
Power |
|
| 12 VDC, 1.2A, external power supply |
Physical |
|
| Height | 2.4" (61 mm) |
| Depth | 6.8" (172 mm) |
| Width | 9.6" (244 mm) |
| Weight | 2.2 lbs (1 kg) |
As a commitment to constant improvement, PreSonus® Audio Electronics, Inc., reserves the right to change any specification stated herein, at any time, without notification.