Features
Remote network (LAN) management, control, and monitoring of connected PreSonus® CDL-series loudspeakers and WorxAudio® PDA-series amplifiers
Windows® and macOS®
Dante® network compatible
Input Selection
- Analog
- Dante
- Fail-Over (switches to analog if no Dante input detected)
Identify (Interrogate) function on CDL Loudspeakers
Speaker Management
- Speaker naming
- Speaker mapping
- Individual speaker management
- Volume, Input Delay, Limiter, and Compressor controls
- Mute/Solo
- Multiple venues (8 groups per Venue)
- Speaker Groups (speakers in a Group cannot be addressed individually)
- Speaker Net Browser and Edit
- Group monitor
- Group level control
- Group mute and solo
- Speaker Group browser
- Store multiple speaker Groups together
- Speaker mapping via drag-and-drop GUI
DSP Speaker Control
- Up to 800 ms alignment delay in 0.1 ms increments
- ∞:1 limiter with -28 dB to 0 dB threshold
- Compressor with –56 dB to 0 dB Threshold range; Attack variable from 0.2 to 150 ms; Release from 2.5 to 900 ms; Ratio from 1:1 to 14:1; up to 28 dB Make-up gain; soft knee
- 8--band parametric EQ
- Frequency, Gain and Q with selectable bell, notch, all-pass, low-shelf, high-shelf, bandpass, high-pass, low-pass curves
- Separate high-pass and low-pass filters with selectable Butterworth (6, 12, 18, or 24 dB slopes), Bessel (6, 12, 18, or 24 dB slopes), or Linkwitz-Riley (12 or 24 dB slopes).
- Polarity invert (subwoofers)
- Store/load presets
- Store/load complete speaker setups
- Copy/paste settings to other speakers
Performance Monitoring
- Input/output levels
- Real-time temperature
- ADC clip detection
- Power-amp soft limiting
- Store/load complete speaker setups
- Copy/paste settings to other speakers