This product has been discontinued.
Computer system requirements:
Below are the minimum computer-system requirements for UC Surface, QMix-UC, and Studio One®.
Mac®
- macOS® 10.13 or higher (64-bit only)
- Intel® Core™ i3 processor or better (Native support for Apple Silicon)
- 4 GB RAM (8 GB or more recommended)
Windows®
- Windows 10 (64-bit only)
- Intel Core i3 / AMD A10 processor or better
- 4 GB RAM (8 GB or more recommended)
Mac and Windows Systems
- USB-C™ or USB-A 2.0 port compatibility
- 32 GB hard disk space
- PreSonus Universal Control 2.0 or higher
- Monitor with 1366x768 resolution (high-dpi monitor recommended)
- Multitouch-enabled monitor required for touch operation
iOS
- iOS® 10 or later
- iPad® Pro, iPad Air 2, iPad Air, iPad mini 4, iPad mini with Retina display, iPad (4th generation) (UC Surface)
Android
- Android™ 6.0 (Marshmallow) or later
- Android smartphone (QMix-UC)
- Android tablet (8-inch) with 1024x768 resolution (UC Surface)
Note: The minimum system requirements may differ for DAWs other than Studio One. Please check the requirements for your DAW of choice with its manufacturer.
Note that the speed of your processor, amount of RAM and size and speed of your hard drive will greatly affect the overall performance of your recording system. Also, a more powerful system (faster processor with more RAM) will allow for lower latency (signal delay) than you might experience while monitoring audio signals.
VST is a registered trademark of Steinberg Media Technologies GmbH
ASIO is a trademark and software of Steinberg Media Technologies GmbH
Technical Specifications
Microphone Preamp
|
|
| Type |
XLR Female (via Combo), Balanced Remote |
| Maximum Input level (min. gain, 1 [email protected]% THD+N) |
+12 dBu, ±0.5 dB |
| Gain Control Range |
60 dB, ±1 dB |
| Frequency Response (A-D) |
10 Hz to 40 kHz, ±0.2 dB |
| Dynamic Range (min. gain, a-wtd) |
> 110 dB |
| Dynamic Range (mid. Gain, unwtd) |
> 105 dB |
| THD+N (min. gain, a-wtd) |
< 0.005% |
| Input Impedance |
1.6 kΩ |
| EIN (+55 dB gain, 150Ω input, 20 Hz-22 kHz, a-wtd) |
< 128 dBu |
| Common Mode Rejection Ratio (1 kHz, +55dB gain) |
> 55 dB |
| Phantom Power |
+48V, ±3V, >8 mA per channel |
Instrument Inputs
|
|
| Type |
¼” TS Female (via Combo), Unbalanced |
| Maximum Input Level (min. gain, 1 [email protected]% THD+N) |
+16 dBu, ±0.5 dB |
| Gain Control Range |
60 dB, ±1 dB |
| Frequency Response (A-D) |
20 Hz to 20 kHz, ±0.2 dB |
| Dynamic Range (min. gain, a-wtd) |
> 110 dB |
| Dynamic Range (mid. Gain, unwtd) |
> 105 dB |
| THD+N (1 kHz, -1 dBFS, a-wtd) |
< 0.005% |
| THD+N (1 kHz, -1 dBFS, un-wtd) |
< 0.005% |
| Input Impedance |
> 1 MΩ |
| Crosstalk (1 kHz, channel-to-channel) |
< -80 dB |
Line Inputs
|
|
| Type |
¼” TRS Female (via Combo), Balanced |
| Maximum Input Level (min. gain, 1 [email protected]% THD+N) |
+ 18 dBu, +/-0.5 dB |
| Frequency Response (A-D) |
20 Hz to 20 kHz, +/-0.2 dB |
| Dynamic Range (min. gain, a-wtd) |
> 114 dB |
| Dynamic Range (mid. gain, unwtd) |
> 105 dB |
| THD+N (1 kHz, -1 dBFS, a-wtd) |
< 0.005% |
| Input Impedance |
10 kΩ |
| Crosstalk (1 kHz, channel-to-channel) |
< -80 dB |
Main and Line Outputs
|
|
| Type (Line Outputs) |
¼” TRS Female, Impedance Balanced |
| Type (Main Outputs) |
¼” TRS Female, Impedance Balanced |
| Maximum Output Level |
+18 dBu, ±0.5 dB |
| Frequency Response |
20 Hz to 20 kHz, ±0.2 dB |
| Dynamic Range (a-wtd) |
> 112 dB |
| THD+N (1 kHz, -1 dBFS, un-wtd) |
< 0.005% |
| Output Impedance |
51Ω |
| Crosstalk (1 kHz, channel-to-channel) |
< -80 dB |
Headphone Outputs
|
|
| Type |
¼” TRS Female, Stereo, Unbalanced |
| Maximum Output Level |
150 mW/channel @ 60Ω |
| Frequency Response |
20 Hz to 20 kHz, ±0.3 dB |
| Dynamic Range (a-wtd) |
> 103 dB |
| THD+N (1 kHz, -1 dBFS, un-wtd) |
< 0.005% |
| Crosstalk (1 kHz, channel-to-channel) |
< -80 dB |
| Impedance Working Range |
16Ω to 600Ω |
Internal Talkback Microphone
|
|
| Type |
Electret Condenser |
| Sensitivity |
-42 dB |
Signal Level LEDs
|
|
| Signal 1 |
-50 dBFS |
| Signal 2 |
-30 dBFS |
| Signal 3 |
-20 dBFS |
| Signal 4 |
-10 dBFS |
| Signal 5 |
-6 dBFS |
| Signal 6 |
-4 dBFS |
| Signal 7 |
-2 dBFS |
| Clip |
-0.5 dBFS |
Digital Audio
|
|
| Host Interface |
USB 3.0 (backward compatible with USB 2.0) |
| ADC Dynamic Range (A-wtd, 48 kHz) |
118 dB |
| DAC Dynamic Range (A-wtd, 48 kHz) |
118 dB |
| Bit Depth |
24 bits |
| Supported Sample Rates (kHz) |
44.1, 48, 88.2, 96, 176.4, 192 |
| ADAT Optical I/O |
ADAT/SMUX II formats supported [16x16 (44.1/48 kHz), 8x8 (88.2/96 kHz)] |
| S/PDIF I/O |
RCA female connections, supported up to 96 kHz |
| Word Clock I/O |
BNC connector, 4.5 Vpp @75Ω load |
Clock
|
|
| Jitter |
<50 ps RMS (20 Hz – 20 kHz) |
| Jitter Attenuation |
>60 dB (1 ns in => 1 ps out) |
Power
|
|
| External Power Adapter |
+12 VDC, 3.0A, center positive |
| Connector Type |
Barrel: 5.5 mm OD, 2.1 mm ID, 9.5 mm length |
Physical
|
|
| Dimensions |
1U rackmount |
| Height |
1.75” (44.45 mm) |
| Depth |
5.5” (139.7 mm) |
| Width |
19” (482.6 mm) |
| Weight |
4.9 lb. (2.22 kg) |
As a commitment to constant improvement, PreSonus® Audio Electronics, Inc., reserves the right to change any specification stated herein, at any time, without notification.
