This product has been discontinued.
Computer system requirements:
Below are the minimum computer-system requirements for the AudioBox USB® and Studio One®.
Mac
- macOS® 10.11 or higher (64-bit only) or later
- Intel® Core™ Duo processor (Intel Core 2 Duo or Core i3 or better recommended)
- 2 GB RAM (4 GB or more recommended)
Windows
- Windows® 7x 64/x86 SP1 or Windows 8/8.1 x64/x86 or Windows 10 x64/x86
- Intel Core 2 processor (Intel Core i3 processor or better recommended)
- 4 GB RAM (8 GB or more recommended)
Mac and Windows systems
- Internet connection (not required on machine where Studio One is installed but needed for activation)
- DVD-ROM drive
- Monitor with 1280x768 resolution
- 20 GB hard-drive space
The minimum system requirements may differ for DAWs other than Studio One. Please check the requirements for your DAW of choice with its manufacturer.
Note that the speed of your processor, amount of RAM and size and speed of your hard drive will greatly affect the overall performance of your recording system. Also, a more powerful system (faster processor with more RAM) will allow for lower latency (signal delay) than you might experience while monitoring audio or MIDI signals. Monitor resolution for both PC and Macintosh should be no lower than 1024x768 pixels.
VST is a registered trademark of Steinberg Media Technologies GmbH
ASIO is a trademark and software of Steinberg Media Technologies GmbH
Technical Specifications
AudioBox USB
|
|
Microphone Preamp
|
|
| Type |
XLR Female Balanced |
| Frequency Response (±3.0 dB) |
14 Hz to 70 kHz |
| Input Impedance (Balanced) |
1200Ω |
| THD+N (unwtd, 1 kHz @ +4 dBu Output, Unity Gain) |
< 0.008% |
| S/N Ratio (Unity Gain, Ref. = +4 dBu, 20 Hz to 22 kHz) |
> 95 dB |
| Common Mode Rejection Ratio (1 kHz, 55 dB Gain) |
> 45 dB |
| Gain Control Range (± 1 dB) |
0 dB to 35 dB |
| Max Input Level (Unity Gain, 1 kHz @ 0.5% THD+N) |
-3 dBu |
| Phantom Power (±2 VDC) |
+48 VDC |
Instrument Input
|
|
| Type |
¼" |
| TRS Female Unbalanced Input Impedance |
0.5 MΩ |
Line Outputs
|
|
| Type |
¼" |
| Balanced Output Impedance |
51Ω |
Headphone Output
|
|
| Type |
¼" TRS Active Stereo |
| Maximum Output |
60 mW/Ch @ 60Ω Load |
| Frequency Response (±1.0 dB) |
20 Hz - 30 kHz |
MIDI I/O
|
|
| Type |
Dual 5-pin Female DIN |
Digital Audio
|
|
| ADC Dynamic Range (A-wtd, 48 kHz Sample Rate) |
105 dB |
| DAC Dynamic Range (A-wtd, 48 kHz Sample Rate) |
105 dB |
| Bit Depth |
24 |
| Reference Level for 0 dBFS |
+4 dBu |
| Internal Sample Frequency Selections (kHz) |
44.1, 48 |
| Power |
USB Bus-powered |
Physical
|
|
| Dimensions |
1/3U (steel chassis) |
| Height |
5.5” (139.7 mm) |
| Depth |
1.75" (44.45 mm) |
| Width |
5.5” (139.7 mm) |
| Weight |
5 lbs (2.27 kg) |
PS626 Microphone
|
|
General
|
|
| Type |
Small-diaphragm condenser microphone |
| Element |
Electret condenser pressure-gradient microphone |
| Diaphragm |
16 mm gold-plated Mylar |
| Polar pattern |
Cardioid |
| Frequency Response |
20 Hz – 20 kHz |
| Sensitivity |
-41 dB (9 mV/Pa) ±2 dB |
| Output impedance |
50Ω |
| Maximum SPL |
(1 kHz, distortion <1%) 134 dB |
| Equivalent noise |
(EIN, A-weighted): 22 dB |
| Phantom Power Required |
+48V |
| S/N Ratio (1Pa) |
72 dB |
Physical
|
|
| Diameter |
0.79” (20 mm) |
| Length |
3.66” (93 mm) |
HD7 Headphone
|
|
General
|
|
| Acoustic Design |
Dynamic, semi-open |
| Driver |
50 mm, neodymium |
| Frequency Response |
10 Hz to 30 kHz |
| Sensitivity |
98 dB SPL (1 mW) |
| Maximum Power |
300 mW |
| Rated Impedance |
56Ω |
| Earpad |
Leather |
Physical
|
|
| Weight, without Cable |
7.8 oz (222g) |
| Cable |
8' 2" (2.5m) straight, single-sided |
| Plug Adapter |
1/8" to 1/4" (3.5 to 6.3 mm), screw-on, gold-plated, stereo mini-plug |
As a commitment to constant improvement, PreSonus Audio Electronics, Inc., reserves the right to change any specification stated herein, at any time, without notification.
