Computer system requirements:
Below are the minimum computer-system requirements for AudioBox USB 96 Studio.
macOS®
- macOS version 10.13 or later
- 200 MB storage space and 4 GB RAM for Universal Control (required for firmware updates)
- Available USB port
Windows®
- Windows 10 or later (64-Bit Only)
- 200 MB storage space and 4 GB RAM for Universal Control (required for firmware updates and low-latency ASIO support)
- Available USB port
Chrome OS
For information on compatibility with Chrome OS, click here.
iOS/iPadOS
For information on compatibility with iOS/iPadOS, click here.Android
For information on compatibility with Android devices, click here.
The above are the hardware system requirements for this product.
DAW software and Operating System requirements vary.
VST is a registered trademark of Steinberg Media Technologies GmbH
ASIO is a trademark and software of Steinberg Media Technologies GmbH
All other trademarks are property of their respective holders
Technical Specifications
AudioBox USB® 96 Specifications |
|
|---|---|
Microphone Preamp |
|
| Type | XLR Female Balanced |
| Frequency Response (±3.0 dB) | 20 Hz to 20 kHz |
| Input Impedance (Balanced) | 1200Ω |
| THD+N (unwtd, 1 kHz @ +4 dBu Output, Unity Gain) | < 0.008% |
| S/N Ratio (Unity Gain, Ref. = +4 dBu, 20 Hz to 22 kHz) | > 95 dB |
| Common Mode Rejection Ratio (1 kHz, 55 dB Gain) | > 45 dB |
| Gain Control Range (± 1 dB) | 0 dB to 35 dB |
| Max Input Level (Unity Gain, 1 kHz @ 0.5% THD+N) | -3 dBu |
| Phantom Power (±2 VDC) | +48 VDC |
Instrument Input |
|
|---|---|
| Type | ¼" |
| TRS Female Unbalanced Input Impedance | 0.5 MΩ |
Line Outputs |
|
|---|---|
| Type | ¼" |
| Balanced Output Impedance | 51Ω |
Headphone Output |
|
|---|---|
| Type | ¼" TRS Active Stereo |
| Maximum Output | 60 mW/Ch @ 60Ω Load |
| Frequency Response (±1.0 dB) | 20 Hz - 30 kHz |
MIDI I/O |
|
|---|---|
| Type | Dual 5-pin Female DIN |
Digital Audio |
|
|---|---|
| ADC Dynamic Range (A-wtd, 48 kHz Sample Rate) | 105 dB |
| DAC Dynamic Range (A-wtd, 48 kHz Sample Rate) | 105 dB |
| Bit Depth | 24 |
| Reference Level for 0 dBFS | +4 dBu |
| Supported Sample Rates (kHz) | 44.1, 48, 88.2, 96 |
| Power | USB 2.0 Bus-powered |
Physical |
|
|---|---|
| Dimensions | 1/3U (steel chassis) |
| Height | 5.5” (139.7 mm) |
| Depth | 1.75" (44.45 mm) |
| Width | 5.5” (139.7 mm) |
| Weight | 1.4 lbs (0.64 kg) |
M7 Microphone Specifications |
|
|---|---|
General |
|
| Type | Large-diaphragm condenser microphone |
| Element | Electret |
| Polar Pattern | Cardioid |
| Frequency Response | 40 Hz - 18 kHz |
| Sensitivity | -39 dBV/pa (12.2 mV/pa) |
| Rated Impedance | 200Ω |
| Equivalent Input Noise (EIN) | 20 dB |
| Maximum SPL | 136 dB SPL |
| Phantom Power Required | +12 to +52 VDC, 3 mA |
| S/N Ratio | 74 dB |
| Dynamic Range | 11 dB |
| Current Consumption | 3.5 mA |
Physical |
|
|---|---|
| Diameter | 2.13" (54 mm), maximum |
| Length | 6.69" (170 mm) |
| Weight | 11.3 oz. (320g) |
HD7 Headphone Specifications |
|
|---|---|
General |
|
| Acoustic Design | Dynamic, semi-open |
| Driver | 50 mm, neodymium |
| Frequency Response | 10 Hz to 30 kHz |
| Sensitivity | 98 dB SPL (1 mW) |
| Maximum Power | 300 mW |
| Rated Impedance | 56Ω |
| Earpad | Leather |
Physical |
|
|---|---|
| Weight, without Cable | 7.8 oz (222g) |
| Cable | 8' 2" (2.5m) straight, single-sided |
| Plug Adapter | 1/8" to 1/4" (3.5 to 6.3 mm), screw-on, gold-plated, stereo mini-plug |
As a commitment to constant improvement, PreSonus Audio Electronics, Inc., reserves the right to change any specification stated herein, at any time, without notification.