This product has been discontinued.
Computer system requirements:
Below are the minimum computer-system requirements for the AudioBox 22VSL:
Windows
- Windows® 7x 64/x86 SP1 or Windows 8/8.1 x64/x86 or Windows 10 x64/x86
- Intel® Core™ 2 processor (Intel® Core™ i3 processor or better recommended)
- 4 GB RAM (8 GB or more recommended)
Mac
- macOS® 10.11 or higher (64-bit only)
- Intel Core Duo processor (Intel Core 2 Duo or Intel Core i3 or better recommended)
- 2 GB RAM (4 GB or more recommended)
Windows and Mac Systems
- USB 2.0 Port
- Internet connection (only for activation)
- DVD-ROM drive
- Monitor with at least 1024x768 resolution
- 20 GB hard-disk space
- Internal or external 7200 RPM storage drive highly recommended
The minimum system requirements may differ for DAWs other than Studio One. Please check the requirements for your DAW of choice with its manufacturer.
Note that the speed of your processor, amount of RAM and size and speed of your hard drive will greatly affect the overall performance of your recording system. Also, a more powerful system (faster processor with more RAM) will allow for lower latency (signal delay) than you might experience while monitoring audio or MIDI signals. Monitor resolution for both PC and Macintosh should be no lower than 1024x768 pixels.
VST is a registered trademark of Steinberg Media Technologies GmbH
ASIO is a trademark and software of Steinberg Media Technologies GmbH
Technical Specifications
Microphone Inputs
|
|
| Connector Type |
Combo, XLR, female, balanced |
| Mic Preamp EIN |
-129 dB, 20 kHz BW, max gain, Rs=40Ω, A-wtd |
| Frequency Response |
20 Hz - 20 kHz, ±0.3 dB, unity gain |
| THD+N |
0.005%, 0 dBu, 1 kHz, unity gain, 20 kHz BW, A-wtd |
| S/N Ratio |
94 dB, 0 dBu, 1 kHz, unity gain, 20 kHz BW, unwtd |
| Gain Control Range |
-15 dB to +65 dB |
| Input Max Headroom |
+10 dBu, < 0.5% THD |
| Input Impedance |
1.7 kΩ |
| Phantom Power |
+48 VDC, 10 mA total |
Instrument Inputs
|
|
| Connector Type |
Combo, ¼” TS, female, unbalanced |
| Frequency Response |
20 Hz - 20 kHz, ±0.3 dB, unity gain |
| THD+N |
0.006%, 0 dBu, 1 kHz, unity gain, 20 kHz BW, A-wtd |
| S/N Ratio |
89 dB, 0 dBu, 1 kHz, unity gain, 20 kHz BW, unwtd |
| Gain Control Range |
-30 dB to +50 dB |
| Input Max Headroom |
+15 dBu, < 0.5% THD |
| Input Impedance |
1 MΩ |
Analog Outputs
|
|
| Connector Type |
¼” TRS, female, impedance balanced |
| Frequency Response |
20 Hz - 20 kHz, ±0.2 dB |
| THD+N |
0.002%, 1 kHz, 20 kHz BW, A-wtd |
| S/N Ratio |
107 dB, 1 kHz, max gain, 20 kHz BW, unwtd |
| Output Level |
+10 dBu |
| Output Impedance |
51Ω |
Headphone Outputs
|
|
| Connector Type |
¼” TRS, female, stereo |
| Maximum Power |
30 mW/ch @ 60Ω load |
| Frequency Response |
20 Hz - 20 kHz, ±0.5 dB, max gain |
| THD+N |
0.08%, 1 kHz, max gain, 20 kHz BW, A-wtd |
| S/N Ratio |
90 dB, 1 kHz, max gain, 20 kHz BW, unwtd |
Digital
|
|
| Host Interface |
USB 2.0 high-speed |
| Bit Depth |
24-bit |
| Sample Rates |
44.1 kHz, 48 kHz, 88.2 kHz, 96 kHz |
| Maximum Latency |
6 mS, analog input to analog output |
| ADC Dynamic Range |
114 dB, 48 kHz sample rate, A-wtd |
| DAC Dynamic Range |
114 dB, 48 kHz sample rate, A-wtd |
Power
|
|
| Type |
USB bus-powered, +5 VDC, < 500 mA |
Physical
|
|
| Dimensions |
1/3U rack-mount (with standard rack tray, not included) |
| Height |
1.75” (44.45 mm) |
| Depth |
5.5” (139.7 mm) |
| Width |
5.5” (139.7 mm) |
| Road-rugged construction with all-metal chassis and metal knobs |
|
| Weight |
Weight 1.6 lb. (0.7 kg) |
As a commitment to constant improvement, PreSonus Audio Electronics, Inc., reserves the right to change any specification stated herein, at any time, without notification.
