Technical Specifications
Acoustic Performance |
|
---|---|
Configuration | Powered subwoofer, ported |
Frequency Response (-3 dB) | 42 Hz – 150 Hz (Variable) |
Maximum Peak SPL | 135 dB |
Crossover Frequency | 90 Hz |
Low Pass Filter Range | 50 Hz - 150 Hz |
Transducer |
|
---|---|
LF Transducer | 1x18" Ferrite |
Voice Coil Diameter | 4" |
Amplifier |
|
---|---|
Type | Class D |
Total Power Output | 2,000W Peak (1,000 RMS) |
LF Power | 2 x 500W bridged (1000W total) |
Cooling | Free air convection |
Rated THD | <0.05% (20 Hz - 20 kHz) |
Dynamic Range | 119 dB (A-weighted) |
Bandwidth | 20 Hz - 20 kHz |
Connections and Controls |
|
---|---|
Input Channels | 2 line |
Input Connector Types | 2 combo |
Line Input Impedance | 10 kΩ |
Maximum Input | +22 dBu |
Output Connector | 2 XLR (M): Mix out, Direct out |
Controls | Output Level Low Pass Filter Preset Select Polarity Invert On/Off Mono On/Off Front LED On/Off |
Indicators | DSP Preset, Polarity Invert On/Off, Mono On/Off, Front LED On/Off, Signal, Clip, Thermal |
DSP |
|
---|---|
Presets | Extended LF |
Polarity | Normal or Reverse |
Bit Depth | 24-bit |
Sample Rate | 96 kHz |
Enclosure |
|
---|---|
Material | Eucalyptus plywood |
Finish | Chemline™ polyurethane |
Grille | Powder-coated steel |
Dimensions (HxWxD) | 22.5” x 25” x 24.5” (572 mm x 635 mm x 622 mm) |
Unit Weight | 95 lbs. (43 kg) |
Handles | 2 (one on each side) |
Safety |
|
---|---|
Amplifier Protection | Over-current, DC, over/under-voltage, over-temperature, high frequency |
Transducer Protection | limiter |
Power |
|
---|---|
AC Power Input | 100-230V~, 50-60 Hz |
AC Power Consumption (1/8 Power) | 150W |
Suspension Mounting |
|
---|---|
Rigging Points | 12 M10 |
Mounting | Ground-stack provisions |
As a commitment to constant improvement, PreSonus® Audio Electronics, Inc., reserves the right to change any specification stated herein, at any time, without notification.