This product has been discontinued.
Computer system requirements:
Below are the minimum computer-system requirements for UC Surface, QMix-UC, and Studio One®.
Mac
- macOS® 10.13, 10.14, 10.15 (64-bit only)
- Intel® Core™ 2 Duo processor (Intel Core i3 or faster recommended)
- 4 GB RAM (8 GB or more recommended)
Windows
- Windows 10 x64
- Intel Core 2 Duo (Intel Core i3 or faster recommended)
- 4 GB RAM (8 GB or more recommended)
Mac and Windows Systems
- Internet connection
- Internal or external 7200 RPM storage drive highly recommended
- 30 GB hard disk space
- Monitor with 1366x768 resolution
iOS
- iOS 10 or later
- iPad Pro, iPad Air 2, iPad Air, iPad mini 4, iPad mini with Retina display, iPad (4th generation)
Android
- Android™ 6.0 (Marshmallow) or later
- Android smartphone (QMix-UC)
- Android tablet (8-inch) with 1024x768 resolution (UC Surface)
Note: The minimum system requirements may differ for DAWs other than Studio One. Please check the requirements for your DAW of choice with its manufacturer.
Note that the speed of your processor, amount of RAM and size and speed of your hard drive will greatly affect the overall performance of your recording system. Also, a more powerful system (faster processor with more RAM) will allow for lower latency (signal delay) than you might experience while monitoring audio signals.
VST is a registered trademark of Steinberg Media Technologies GmbH
ASIO is a trademark and software of Steinberg Media Technologies GmbH
Technical Specifications
Network
|
|
| Type |
Ethernet / AVB |
Microphone Inputs
|
|
| Type |
XLR Female (via Combo), Balanced Remote |
| Maximum Input Level |
+12 dBu, ±0.5 dB, Unity Gain |
| Gain Control Range |
65 dB, ±1 dB |
| Gain |
0 to +65 dB, ±1 dB |
| Frequency Response to Main Output |
20 Hz-20 kHz, ±0.5 dBu |
| Frequency Response (A-D) |
10 Hz to 40 kHz, ±0.2 dB |
| Input Impedance |
1 kΩ |
| THD to Main Output |
<0.005% max, +4 dBu, 20 Hz-20 kHz, unity gain, unwtd |
| THD+N (min. gain, a-wtd) |
< 0.005% |
| Dynamic Range (min. gain, a-wtd) |
> 114 dB |
| Dynamic Range (mid. gain, unwtd) |
> 105 dB |
| Signal-to-Noise Ratio to Main Output |
94 dB |
| Common Mode Rejection |
65 dB (1 kHz, unity gain) |
| EIN (+55 dB gain, 150Ω input, 20 Hz-22 kHz, a-wtd) |
< 128 dBu |
| Phantom Power |
+48 V (±2 V, > 8 mA per channel) |
Line Inputs
|
|
| Type |
¼” TRS Female (via Combo), Balanced |
| Maximum Input Level |
+18 dBu |
| Frequency Response (A-D) |
20 Hz to 20 kHz, ±0.2 dB |
| Frequency Response to Main Out |
20 Hz to 20 kHz, ±0.5 dBu |
| THD to Main Output |
<0.005% max, +4 dBu, 20 Hz-20 kHz, unity gain, unwtd |
| THD+N (1 kHz, -1 dBFS, a-wtd) |
< 0.005% |
| Input Impedance |
10 kΩ |
| Signal-to-Noise Ratio to Main Output |
94 dB |
| Max Input Level |
+18 dBu |
| Dynamic Range (min. gain, a-wtd) |
> 114 dB |
| Dynamic Range (mid. gain, unwtd) |
> 105 dB |
| Crosstalk (1 kHz, channel-to-channel) |
< -80 dB |
Physical
|
|
| Length |
22.35" (58.6 cm) |
| Width (chassis only) |
17.22" (43.74 cm) |
| Maximum Height |
6.9" (17.53 cm) |
| Weight |
23 lbs. (10.43 kg) |
Monitor Line Outputs
|
|
| Type |
XLR Male, Electrically Balanced |
| Maximum Output Level |
+24 dBu, ±0.5 |
| Frequency Response |
20 Hz to 20 kHz, ±0.2 dB |
| Dynamic Range (a-wtd) |
> 112 dB |
| THD+N (1 kHz, -1 dBFS, un-wtd) |
< 0.005% |
| Output Impedance |
100Ω |
| Crosstalk (1 kHz, channel-to-channel) |
< -80 dB |
Headphone Outputs
|
|
| Type |
¼” TRS Female, Stereo, Unbalanced |
| Maximum Output Level |
120 mW/channel @ 60 Ω |
| Frequency Response |
20 Hz to 20 kHz, ±0.5 dB |
| Dynamic Range (a-wtd) |
> 103 dB |
| THD+N |
0.01%, 1 kHz, max gain, 20 Hz BW, unwt |
| Crosstalk (1 kHz, channel-to-channel) |
< -80 dB |
| Signal-to-Noise Ratio |
96 dB 1kHz, max gain, 20 kHz BW, unwtd |
System Crosstalk
|
|
| Input to Output |
-90 dBu +4 dBu, 20 Hz-20 kHz, unwtd |
| Adjacent Channels |
-87 dBu +4 dBu, 20 Hz-20 kHz, unwtd |
Digital Audio
|
|
| ADC Dynamic Range |
118 dB min (A-wtd, 48 kHz) |
| DAC Dynamic Range |
118 dB min (A-wtd, 48 kHz) |
| Sample Rate |
44.1, 48 kHz |
| Reference Level for 0 dBFS |
+18 dBu |
Clock
|
|
| Clock Jitter |
<20 Ps RMS, 20 Hz-20 kHz |
| Jitter Attenuation |
>60 dB 1 ns in ~1 ps out |
Power / Environmental
|
|
| Connector |
IEC |
| Input-Voltage Range |
100 to 230V, 50-60 Hz |
| Power Requirements |
200W |
| Temperature Range |
0˚ to 40˚ Celsius / 32˚ to 104˚ Fahrenheit |
NOTE: As a commitment to constant improvement, PreSonus Audio Electronics, Inc., reserves the right to change any specification stated herein at any time, without notification.
