This product has been discontinued.
Technical Specifications
Acoustic Performance
|
|
Configuration |
3-way, quad-amplified loudspeaker system |
Frequency Response (-10 dB) |
54 Hz to 23 kHz |
Frequency Response (-6 dB) |
59 Hz to 22 kHz |
Nominal Coverage (-6 dB) |
90° x 60° |
Maximum Peak SPL |
133 dB |
Crossover Frequency |
1.7 kHz |
Directivity Index (DI) |
10 dB, >460 Hz |
Directivity Factor (Q) |
10.0, >460 Hz |
Transducer
|
|
LF Transducer |
2x8" Ferrite |
MF Transducer |
8" CoActual™ |
HF Transducer |
1.75" compression driver |
Amplifier
|
|
Type |
Class D |
Total Power Output |
2,000W (total power without protection algorithms and limiter enabled) |
LF Power |
2 x 500W |
MF Power |
500W |
HF Power |
500W |
Rated THD |
<0.05% (20 Hz - 20 kHz) |
Dynamic Range |
119 dB (A-weighted) |
Bandwidth |
20 Hz - 20 kHz |
Cooling |
Free air convection |
Connections and Controls
|
|
Input Channels |
1 mic, 1 line |
Input Connector Types |
1 XLR (F), 1 combo |
Phantom Power |
15 VDC (Ch. 1 only) |
Mic Input Impedance |
1 kΩ |
Line Input Impedance |
10 kΩ |
Maximum Input |
+22 dBu |
Output Connector |
1 XLR (M) - Mix out |
Controls |
Mic Level (Variable: Off to +48 dB), Line Attenuation (Variable: -24 dB to 0 dB), Speaker Attenuation (Variable: -24 dB to 0 dB) |
Indicators |
DSP Preset, HPF On/Off, Network Connected, Network Activity, Wi-Fi Setup, Wi-Fi On, Signal, Limit, Clip, Thermal |
DSP
|
|
Contour Presets |
Normal, LBR Source, Floor Monitor |
HPF |
100 Hz, 4th-order Linkwitz-Riley |
Bit Depth |
24-bit |
Sample Rate |
96 kHz |
Enclosure
|
|
Material |
Eucalyptus Plywood |
Finish |
Chemline™ polyurethane |
Grille |
Powder-coated steel |
Dimensions (HxWxD) |
30.1" x 15.7" x 13.3"
(764.54 x 398.78 x 337.82 mm) |
Unit Weight |
51 lbs (23.13 kg) |
Handles |
One on each side |
Monitor Angle |
50° |
Safety
|
|
Amplifier Protection |
Over-current, DC, over/under-voltage, over-temperature, high frequency |
Transducer Protection |
4-ch. multi-threat limiter |
Power
|
|
AC Power Input |
100-230V~, 50-60 Hz |
AC Power Consumption (1/8 Power) |
250W |
Suspension Mounting
|
|
Rigging Points |
12 M10 |
Mounting |
35 mm, 2-position |
Please see complete mechanical drawings when building a custom case.
As a commitment to constant improvement, PreSonus® Audio Electronics, Inc., reserves the right to change any specification stated herein, at any time, without notification.