This product has been discontinued.

Technical Specifications

Acoustic Performance

Configuration 3-way, triamplified loudspeaker system
Frequency Response (-10 dB) 46 Hz to 23 kHz
Frequency Response (-6 dB) 52 Hz to 22 kHz
Nominal Coverage (-6 dB) 90° x 60°
Maximum Peak SPL 131 dB
Crossover Frequency

​LF: (overlapped) 100 Hz - 1 kHz, HF: 1.8 kHz

Directivity Index (DI) 10 dB, >420 Hz
Directivity Factor (Q) 10.0, >420 Hz

Transducer

LF Transducer 1x15" Ferrite
MF Transducer 8" CoActual™
HF Transducer 1.75" compression driver

Amplifier

Type Class D
Total Power Output 2,000W (total power without protection algorithms and limiter enabled)
LF Power 2 x 500W
MF Power 500W
HF Power 500W
Rated THD <0.05% (20 Hz - 20 kHz)
Dynamic Range 119 dB (A-weighted)
Bandwidth 20 Hz - 20 kHz
Cooling Free air convection

Connections and Controls

Input Channels 1 mic, 1 line
Input Connector Types 1 XLR (F), 1 combo
Phantom Power 15 VDC (Ch. 1 only)
Mic Input Impedance 1 kΩ
Line Input Impedance 10 kΩ
Maximum Input +22 dBu
Output Connector 1 XLR (M) - Mix out
Controls Mic Level (Variable: Off to +48 dB), Line Attenuation (Variable: -24 dB to 0 dB), Speaker Attenuation (Variable: -24 dB to 0 dB)
Indicators

DSP Preset, HPF On/Off, Network Connected, Network Activity, Wi-Fi Setup, Wi-Fi On, Signal, Limit, Clip, Thermal

DSP

Contour Presets Normal, LBR Source, Floor Monitor
HPF 100 Hz, 4th-order Linkwitz-Riley
Bit Depth 24-bit
Sample Rate 96 kHz

Enclosure

Material Eucalyptus Plywood
Finish Chemline™ polyurethane
Grille Powder-coated steel
Dimensions (HxWxD) 27.9" x 21.3" x 18.6"
(708.66 x 541 mm x 472.44)
Unit Weight 71 lbs (32.2 kg)
Handles One on each side
Monitor Angle 50°

Safety

Amplifier Protection Over-current, DC, over/under-voltage, over-temperature, high frequency
Transducer Protection 4-ch. multi-threat limiter

Power

AC Power Input 100-230V~, 50-60 Hz
AC Power Consumption (1/8 Power) 250W

Suspension Mounting

Rigging Points 12 M10
Mounting 35 mm, 2-position

Please see complete mechanical drawings when building a custom case.

As a commitment to constant improvement, PreSonus® Audio Electronics, Inc., reserves the right to change any specification stated herein, at any time, without notification.