This product has been discontinued.
Computer system requirements:
Below are the minimum computer-system requirements for the FireStudio Project:
Windows
- Windows® 7x 64/x86 SP1 or Windows 8/8.1 x64/x86 or Windows 10 x64/x86
- Intel® Core™ 2 processor (Intel Core i3 processor or better recommended)
- 4 GB RAM (8 GB or more RAM recommended)
Mac
- Mac® OS X 10.6.8 or later
- Intel Core Duo processor (Intel Core 2 Duo or Intel Core i3 or better recommended)
- Apple M1 Mac (Apple Silicon Series) not supported
- 2 GB RAM (4 GB or more recommended)
Windows and Mac Systems
- FireWire (IEEE 1394) port or Thunderbolt Port and Thunderbolt to FireWire Adapter
- Internet connection (only for activation)
- DVD-ROM drive
- Monitor with at least 1024x768 resolution
- 20 GB hard-disk space
- Internal or external 7200 RPM storage drive highly recommended
The minimum system requirements may differ for DAWs other than Studio One®. Please check the requirements for your DAW of choice with its manufacturer.
Note that the speed of your processor, amount of RAM and size and speed of your hard drive will greatly affect the overall performance of your recording system. Also, a more powerful system (faster processor with more RAM) will allow for lower latency (signal delay) than you might experience while monitoring audio or MIDI signals. Monitor resolution for both PC and Macintosh should be no lower than 1024x768 pixels.
Technical Specifications
Microphone Preamp
|
|
| Type |
XLR Female Balanced |
| Frequency Response (±0.5 dB) |
20 Hz to 50 kHz |
| Frequency Response (±3.0 dB) |
20 Hz to 150 kHz |
| Input Impedance (Balanced) |
1600Ω |
| THD+N (unwtd, 1 kHz @ +4 dBu Output, Unity Gain) |
< 0.003% |
| EIN (unwtd, 55 dB Gain, 150Ω Input, 20 Hz to 22 kHz) |
-126 dBu |
| S/N Ratio (Unity Gain, unwtd, Ref. = +4 dBu, 20 Hz to 22 kHz) |
> 101 dB |
| Common Mode Rejection Ratio (1 kHz, 55 dB Gain) |
> 55 dB |
| Gain Control Range (± 1 dB) |
-4 dB to 50 dB |
| Maximum Input Level (Unity Gain, 1 kHz @ 0.5% THD+N) |
+14 dBu |
| Signal Level LEDs |
|
| Red / Clip (±0.5 dBu) |
+10 dBu (0 dBFS) |
| Yellow (±0.5 dBu) |
+4 dBu (-6 dBFS) |
| Green (±0.5 dBu) |
-30 dBu (-40 dBFS) |
| Phantom Power |
(±2 VDC) +48 VDC |
Instrument Input (Channels 1 and 2 only)
|
|
| Type |
¼” TRS Female Unbalanced |
| Input Impedance |
1 MΩ |
Line Inputs
|
|
| Type |
¼” TRS Female Balanced |
| Frequency Response (±0.5 dB) |
20 Hz to 50 kHz |
| Frequency Response (±3.0 dB) |
20 Hz to 150 kHz |
| Input Impedance (Balanced) |
10 KΩ |
| THD+N (unwtd, 1 kHz @ +4 dBu Output, Unity Gain) |
< 0.003% |
| S/N Ratio (Unity Gain, unwtd, Ref. = +4 dBu, 20 Hz to 22 kHz) |
> 101 dB |
| Gain Control Range (±1 dB) |
-16 dB to +16 dB |
| Maximum Input Level (Unity Gain, 1 kHz @ 0.5% THD+N) |
+10 dBu |
| Maximum Input Level (Minimum Gain, 1 kHz @ 0.5% THD+N) |
+22 dBu |
Line Outputs (Preamp, General Purpose, and Main Outputs)
|
|
| Type |
¼” TRS Balanced |
| Output Impedance |
51Ω |
Headphone Output
|
|
| Type |
¼” TRS Active Stereo |
| Maximum Output |
150 mW/ch @ 60Ω Load |
| Frequency Response (±1.0 dB) |
10 Hz – 70 kHz |
Digital Audio
|
|
| FireWire (IEEE 1394) Speed |
400 Mbps |
| ADC Dynamic Range (A-wtd, 48 kHz sample rate) |
114 dB |
| DAC Dynamic Range (A-wtd, 48 kHz sample rate) |
114 dB |
| Bit Depth |
24 |
| Reference Level for 0dBFS |
+10 dBu |
| Internal Sample Frequency Selections |
44.1, 48, 88.2, 96 kHz |
| External Sample Frequency Input |
S/PDIF |
| Clock Jitter |
<20 ps RMS, 20 Hz-20 kHz |
| Clock Jitter Attenuation |
>60dB; 1 ns in, approx.1 ps out |
Power
|
|
| Input Connector Type |
IEC |
| Input Voltage Range |
90 to 230 VAC |
| Power Requirements (Continuous) |
20W |
Physical
|
|
| Dimensions |
1U rackmount |
| Height |
1.75” (44.45 mm) |
| Depth |
7” (177.8 mm) |
| Width |
19” (482.6 mm) |
| Weight |
7 lbs. (3.18 kg) |
As a commitment to constant improvement, PreSonus Audio Electronics, Inc., reserves the right to change any specification stated herein, at any time, without notification.
