Learn Support Events

This product has been discontinued.

Computer system requirements:

Below are the minimum computer-system requirements for theFireStudio Mobile:

Windows

  • Windows® 7x 64/x86 SP1 or Windows 8/8.1 x64/x86 or Windows 10 x64/x86
  • Intel® Core™ 2 processor (Intel Core i3 processor or better recommended)
  • 4 GB RAM (8 GB or more recommended)

Mac

  • Mac® OS X 10.6.8 or later
  • Intel Core Duo processor (Intel Core 2 Duo or Intel Core i3 or better recommended)
  • Apple M1 Mac (Apple Silicon Series) not supported
  • 2 GB RAM (4 GB or more recommended)

Windows and Mac Systems

  • FireWire (IEEE 1394) port or Thunderbolt port and Thunderbolt to FireWire adapter
  • Internet connection (only for activation)
  • DVD-ROM drive
  • Monitor with at least 1024x768 resolution
  • 20 GB hard-disk space
  • Internal or external 7200 RPM storage drive highly recommended
The minimum system requirements may differ for DAWs other than Studio One®. Please check the requirements for your DAW of choice with its manufacturer.
Note that the speed of your processor, amount of RAM and size and speed of your hard drive will greatly affect the overall performance of your recording system. Also, a more powerful system (faster processor with more RAM) will allow for lower latency (signal delay) than you might experience while monitoring audio or MIDI signals. Monitor resolution for both PC and Macintosh should be no lower than 1024x768 pixels.

Known compatible and incompatible hardware

Technical Specifications

Microphone Preamp
Type XLR Female Balanced
Frequency Response (+0, -0.5 dB) 20 Hz to 50 kHz
Frequency Response (+0/, -3.0 dB 20 Hz to 150 kHz
Input Impedance 1.6 kΩ
THD + N (unwtd, 1 kHz @ +4 dBu Output, Unity Gain) < 0.008%
EIN (unwtd, 55 dB Gain, 150Ω Input, 20 Hz to 22 kHz) -130 dBu
S/N Ratio (Unity Gain, unwtd, Ref = +4 dBu, 20 Hz to 22 kHz) >101 dB
Common Mode Rejection Ratio (1 kHz, 55 dB Gain) >55 dB
Gain Control Range (± 1 dB) –10 dB to 70 dB
Maximum Input level (Unity Gain, 1 [email protected]% THD+N) +14 dBu
Phantom Power (± 2 VDC) +48 VDC

Instrument Input (¼" TRS, Channels 1 & 2)
Type TS Female Unbalanced
Input Impedance 1 MΩ

Line Inputs (Channels 3-8)
Type TRS Female Balanced
Frequency Response (+0, -5 dB) 20 Hz to 50 kHz
Frequency Response (+0/-3.0 dB) 20 Hz to 150 kHz
Input Impedance 10 kΩ
THD + N (unwtd, 1 kHz @ +4 dBu Output, Unity Gain) < 0.002%
S/N Ratio (Unity Gain, unwtd, Ref = +4 dBu, 20 Hz to 22 kHz) >101 dB
Maximum Input level (1 kHz @ 0.5% THD+N) +10 dBu

Main Outputs
Type ¼” TRS Impedance Balanced
Output Impedance 51Ω

Headphone Output
Type ¼” TRS Active Stereo
Maximum Output 150 mW/Ch. @ 60Ω Load
Frequency Response 10 Hz - 70 kHz

Digital Audio
FireWire (IEEE 1394) Speed 400 Mbps
ADC Dynamic Range (A-wtd, 48 kHz) 118 dB
DAC Dynamic Range (A-wtd, 48 kHz) 118 dB
Bit Depth 24 bits
Reference Level for 0 dBFS +10 dBu
Internal Sample Frequency Selections 44.1, 48, 88.2, 96 kHz
Clock Jitter <20 ps RMS (20 Hz – 20 kHz)
Clock Jitter Attenuation >60 dB (1 ns in => 1 ps out)

Power
Bus Power 6-pin FireWire 400 or FireWire 800
Power Supply External Switching Supply (12 VDC/1A)

Physical
Dimensions 1/3U rack-mount (with standard rack tray, not included)
Height 1.75” (44.45 mm)
Depth 5.5” (139.7 mm)
Width 5.5” (139.7 mm)
Weight 4.5 lbs (2 kg)

As a commitment to constant improvement, PreSonus® Audio Electronics, Inc., reserves the right to change any specification stated herein, at any time, without notification.