PreSonus StudioLive Series III Ecosystem Checklist

Welcome to the StudioLive family! The following checklist will help ensure your system is fully optimized for the absolute best sound and experience for your application:

  1. ​Register all products at

  2. Install the latest version of UC Surface. Don't have UC Surface? Download it here.

  3. Update to the latest firmware for every StudioLive Series III Ecosystem product on the network.

  1. Double check your Ethernet cables. Ethernet cables must be CAT5e or CAT6. PreSonus recommends using cables that are ETLA certified and connectors crimped to T568B Wiring Standard.

  1. Route your audio streams. IMPORTANT: Network Clocking requires each device to be receiving an audio stream from the primary mixer.

  1. Check out PreSonus' online AVB resources to maximize your network's potential.